# Configuring a custom VFD and spindle

**URL:** https://forum.onefinitycnc.com/t/configuring-a-custom-vfd-and-spindle/2397
**Category:** Spindle/VFD (Aftermarket/Unsupported)
**Created:** [December 30, 2020, 4:21am UTC](https://forum.onefinitycnc.com/t/configuring-a-custom-vfd-and-spindle/2397 "2020-12-30T04:21:36Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![mauroluciobh](https://avatars.discourse-cdn.com/v4/letter/m/22d042/32.png) [@mauroluciobh](https://forum.onefinitycnc.com/u/mauroluciobh)
#### Post date: [March 1, 2022, 4:35pm UTC](https://forum.onefinitycnc.com/t/configuring-a-custom-vfd-and-spindle/2397/4 "2022-03-01T16:35:34Z")

</div>

Hi,  
Has anyone ever used a FULING VFD with Onefinity controller that could share the wiring, setting and experience?

---

_[View the full topic](https://forum.onefinitycnc.com/t/configuring-a-custom-vfd-and-spindle/2397)._