# Constant disconnect of usb drive (Masso) (solved see faq)

**URL:** <https://forum.onefinitycnc.com/t/constant-disconnect-of-usb-drive-masso-solved-see-faq/21733>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [August 3, 2023, 7:25pm UTC](https://forum.onefinitycnc.com/t/constant-disconnect-of-usb-drive-masso-solved-see-faq/21733 "2023-08-03T19:25:47Z")\
**Posts on this page:** 1\
**Showing post:** 28

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [August 8, 2023, 4:21am UTC](https://forum.onefinitycnc.com/t/constant-disconnect-of-usb-drive-masso-solved-see-faq/21733/28 "2023-08-08T04:21:23Z")

</div>

Hey Marcel,

everytime I have a USB drive that is not recognized stably somewhere,

1. I first Iook into the syslog for status messages if possible
2. I put a [USB Hub](https://en.wikipedia.org/wiki/USB_hub) **with a separate power supply** in between and look if this helps.

---

_[View the full topic](https://forum.onefinitycnc.com/t/constant-disconnect-of-usb-drive-masso-solved-see-faq/21733)._