# Controller cut preview

**URL:** https://forum.onefinitycnc.com/t/controller-cut-preview/11558
**Category:** Original/PRO Series (Buildbotics) (Gen 1)
**Created:** [February 28, 2022, 7:13pm UTC](https://forum.onefinitycnc.com/t/controller-cut-preview/11558 "2022-02-28T19:13:15Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![Dustoff00](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@Dustoff00](https://forum.onefinitycnc.com/u/Dustoff00)
#### Post date: [March 3, 2022, 3:14pm UTC](https://forum.onefinitycnc.com/t/controller-cut-preview/11558/7 "2022-03-03T15:14:51Z")

</div>

Not that I am aware of… I do believe there is a thread on this site about connecting you laptop directly to the 1F controller with an ethernet cable and accessing that way, but don’t recall the thread title. If I run into it, I will come back and post.

Here is one I found. [How To Connect To The Onefinity Controller Without A Screen Directly Connected Via The HDMI](https://forum.onefinitycnc.com/t/how-to-connect-to-the-onefinity-controller-without-a-screen-directly-connected-via-the-hdmi/6705)

and maybe this one with video… [Direct connection from 1F controller to PC - #2 by Toml](https://forum.onefinitycnc.com/t/direct-connection-from-1f-controller-to-pc/5338/2)

---

_[View the full topic](https://forum.onefinitycnc.com/t/controller-cut-preview/11558)._