# Controller died **URL:** \ **Category:** Uncategorized\ **Created:** [June 18, 2022, 4:23pm UTC](https://forum.onefinitycnc.com/t/controller-died/13694 "2022-06-18T16:23:22Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![dannpar](https://avatars.discourse-cdn.com/v4/letter/d/da6949/32.png) [@dannpar](https://forum.onefinitycnc.com/u/dannpar)\ **Post date:** [June 18, 2022, 4:23pm UTC](https://forum.onefinitycnc.com/t/controller-died/13694/1 "2022-06-18T16:23:23Z")
after ten months machine will not turn on. i checked an cleaned all connections. made sure electrc source was okay, and that panic buton was not on. could it really be dead already ---
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [June 18, 2022, 4:28pm UTC](https://forum.onefinitycnc.com/t/controller-died/13694/2 "2022-06-18T16:28:51Z")
Hey Dann, I’m sorry that your first experience is such an unpleasant one. I would write an E-Mail to [support@onefinitycnc.com](mailto:support@onefinitycnc.com) Anyway Welcome to the forum! ---
**Author:** ![BJS3D](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/bjs3d/32/8844_2.png) [@BJS3D](https://forum.onefinitycnc.com/u/BJS3D)\ **Post date:** [June 18, 2022, 4:29pm UTC](https://forum.onefinitycnc.com/t/controller-died/13694/3 "2022-06-18T16:29:47Z")
Welcome to the community, Dann. Since you did mention the eStop button, it’s entirely possible that this could be the issue. There are other posts regarding button failure. Edit: I should also note that I experienced something like this recently wherein I thought the controller had died. It turned out that I was running too many things off the same circuit as the controller and it apparently wasn’t being supplied enough current to actually turn on. If that’s not the case, I would definitely do as @349iq2345 suggested and contact Support.