# Controller Firmware Updates

**URL:** <https://forum.onefinitycnc.com/t/controller-firmware-updates/873>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [September 16, 2020, 5:29pm UTC](https://forum.onefinitycnc.com/t/controller-firmware-updates/873 "2020-09-16T17:29:02Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![reticent\_fly](https://avatars.discourse-cdn.com/v4/letter/r/278dde/32.png) [@reticent\_fly](https://forum.onefinitycnc.com/u/reticent_fly)\
**Post date:** [June 19, 2022, 7:48pm UTC](https://forum.onefinitycnc.com/t/controller-firmware-updates/873/16 "2022-06-19T19:48:20Z")

</div>

the password will be either buildbotics or onefinity. I believe that it’s covered in the instructions on the firmware page?

> [@What is the Firmware update password?](https://forum.onefinitycnc.com/t/what-is-the-firmware-update-password/11881):
>
> The password to update will either be: onefinity OR: buildbotics Ensure you do not use capitals. If neither password works, you’ll need to reinstall the OS via this faq: Where to download the latest firmware:

---

_[View the full topic](https://forum.onefinitycnc.com/t/controller-firmware-updates/873)._