# Controller Setttings

**URL:** <https://forum.onefinitycnc.com/t/controller-setttings/23837>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [December 5, 2023, 1:11pm UTC](https://forum.onefinitycnc.com/t/controller-setttings/23837 "2023-12-05T13:11:03Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [December 6, 2023, 6:20am UTC](https://forum.onefinitycnc.com/t/controller-setttings/23837/3 "2023-12-06T06:20:31Z")

</div>

Hey BellinghamTimber,

you can hack them [this way](https://forum.onefinitycnc.com/t/modifying-jog-increments-on-jog-pane/22085/4)

---

_[View the full topic](https://forum.onefinitycnc.com/t/controller-setttings/23837)._