# Controlling Lube Cube

**URL:** <https://forum.onefinitycnc.com/t/controlling-lube-cube/28957>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [October 13, 2024, 4:27pm UTC](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957 "2024-10-13T16:27:38Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [October 14, 2024, 4:07am UTC](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957/2 "2024-10-14T04:07:52Z")

</div>

Hey Todd,

[workpiece coolant](https://en.wikipedia.org/wiki/Cutting_fluid) is a standard on cnc machines. You can attach different systems to your machine(s). See them at your favorite CNC parts suppliers, e.g.:

> **[Lubricating / Cooling Systems](https://www.sorotec.de/shop/CNC-Accessories/Schmier--Kuehl--systeme/)**
>
> CNC-Tools - Industrie Quality for the hobbyclass

Workpiece coolant is controlled by the standard g-code commands:

- [M7, M8, M9 Coolant Control](https://linuxcnc.org/docs/html/gcode/m-code.html#mcode:m7-m8-m9)

(Official RS-274 NGC G-code. Note that these commands can also be used for other purposes) depending on what you attach to the M7 / M8 control ports (“Load-1” and “Load-2” pins of [25-pin I/O port](https://buildbotics.com/manual-v1-0/#25pinioport) on [buildbotics.com](http://buildbotics.com), e.g. vacuum control)

#### See also

> **[Das ColdEND Gen. 2](https://www.end-cnc-shop.de/gefraestes/32/das-coldend-gen.-2)**
>
> Das ColdEND der zweiten Generation Der Grundkörper wird aus Aluminium hergestellt. Durch den deutlich komplexeren, inneren Aufbau sichergestellt,…

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/0/f08f1d3eefd374a9907d96fcc7ea3f626eada8a2.jpeg "Das erste Endprodukt ;) Meine Minimalmengenschmierung, das ColdEND!") ](https://www.youtube.com/watch?v=Uzdp4ESTP-U&t=853)

> **[The Many Ways Ford Benefits from MQL](https://www.mmsonline.com/articles/the-many-ways-ford-benefits-from-mql)**
>
> Clean machining using minimum quantity lubrication has allowed Ford’s Van Dyke transmission plant to become fundamentally more efficient and effective at manufacturing six-speed automatic transmissions.

---

_[View the full topic](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957)._
