# Controlling Lube Cube **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [October 13, 2024, 4:27pm UTC](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957 "2024-10-13T16:27:38Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![SurfinGump](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/surfingump/32/7699_2.png) [@SurfinGump](https://forum.onefinitycnc.com/u/SurfinGump)\ **Post date:** [October 14, 2024, 5:33am UTC](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957/3 "2024-10-14T05:33:12Z")
See my post about brass carving: > [@Milling Brass - Mess Mitigation - Success/Failure - And Questions](https://forum.onefinitycnc.com/t/milling-brass-mess-mitigation-success-failure-and-questions/28958/4): > > I purchased a mist coolant block and nozzle ([https://www.amazon.com/gp/product/B07HT1Y4BK](https://www.amazon.com/gp/product/B07HT1Y4BK?tag=benmyers-20)), which I attached to the laser mounting screw holes, and used isopropyl alcohol (IPA) as my coolant/lubricant. While it primarily functions as a coolant, I like to think it provides some degree of lubrication as well. The brass blanks were sourced from Send Cut Send (highly recommended). I secured them into a jig made from a scrap piece of wood, using a combination of blue tape and super glue. As long as … --- _[View the full topic](https://forum.onefinitycnc.com/t/controlling-lube-cube/28957)._