# Correct Post Processor to Use

**URL:** <https://forum.onefinitycnc.com/t/correct-post-processor-to-use/18187>\
**Category:** Vectric\
**Created:** [January 16, 2023, 11:16pm UTC](https://forum.onefinitycnc.com/t/correct-post-processor-to-use/18187 "2023-01-16T23:16:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tmarsh](https://avatars.discourse-cdn.com/v4/letter/t/b9e5f3/32.png) [@Tmarsh](https://forum.onefinitycnc.com/u/Tmarsh)\
**Post date:** [January 16, 2023, 11:16pm UTC](https://forum.onefinitycnc.com/t/correct-post-processor-to-use/18187/1 "2023-01-16T23:16:46Z")

</div>

Hello. I just loaded Aspire 9.5 and don’t see a post processor for my woodworker x35. Is there another one that will work from their list of processor’s?

Thanks Tom.

---

<div class="post-metadata">

**Author:** ![helibuff](https://avatars.discourse-cdn.com/v4/letter/h/f05b48/32.png) [@helibuff](https://forum.onefinitycnc.com/u/helibuff)\
**Post date:** [January 17, 2023, 12:18am UTC](https://forum.onefinitycnc.com/t/correct-post-processor-to-use/18187/2 "2023-01-17T00:18:54Z")

</div>

Have a look at this post.  
[Post processor](https://forum.onefinitycnc.com/t/vectric-post-processors-for-10-5-or-older-versions-download-links-included/640)

---

<div class="post-metadata">

**Author:** ![Tmarsh](https://avatars.discourse-cdn.com/v4/letter/t/b9e5f3/32.png) [@Tmarsh](https://forum.onefinitycnc.com/u/Tmarsh)\
**Post date:** [January 17, 2023, 1:25am UTC](https://forum.onefinitycnc.com/t/correct-post-processor-to-use/18187/3 "2023-01-17T01:25:18Z")

</div>

Great. Thank you for your help.