# Custom table for elite forman

**URL:** <https://forum.onefinitycnc.com/t/custom-table-for-elite-forman/30534>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [January 19, 2025, 9:14pm UTC](https://forum.onefinitycnc.com/t/custom-table-for-elite-forman/30534 "2025-01-19T21:14:03Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![TommyObar](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@TommyObar](https://forum.onefinitycnc.com/u/TommyObar)\
**Post date:** [January 20, 2025, 5:46pm UTC](https://forum.onefinitycnc.com/t/custom-table-for-elite-forman/30534/2 "2025-01-20T17:46:24Z")

</div>

There is an ‘Elite Table Builds’ topic.

> [@Elite Table Builds](https://forum.onefinitycnc.com/t/elite-table-builds/18240):
>
> Looking to learn from others as I design my table. I ordered the Foreman so the footprint of the machine is 64"x62.6". Requirements: Must contain the entire dimensions of the machine within the table footprint. Must be on a mobile base. Must have a removable section for vertical carve capabilities. Must have storage for bits and machine extras. I was thinking about building 68"x68"x34" square table with 6 lockable casters. The removable section would probably be 12" deep by 40" wide? Draw…

---

_[View the full topic](https://forum.onefinitycnc.com/t/custom-table-for-elite-forman/30534)._