# Custom Touch Probe?

**URL:** <https://forum.onefinitycnc.com/t/custom-touch-probe/9723>\
**Category:** Touch Probe\
**Created:** [December 21, 2021, 8:24pm UTC](https://forum.onefinitycnc.com/t/custom-touch-probe/9723 "2021-12-21T20:24:34Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\
**Post date:** [December 22, 2021, 1:46am UTC](https://forum.onefinitycnc.com/t/custom-touch-probe/9723/4 "2021-12-22T01:46:41Z")

</div>

Yeah, you absolutely can! In fact, Z axis is all I ever probe. I’m not sure how the Onefinity controller works, but you have to be in a probing mode that only probes the Z axis. The profile shape of the probe plate is not important, just that it’s flat & parallel stock.

 ![PXL_20211222_012206436](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/3/3dc06e7bbdd18d97c93c9c91f208ddc9ae5a80c0.jpeg)

 ![PXL_20211222_014127110](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/e/1eb93466ca043782b201062b1278488dff26b651.jpeg)

 ![PXL_20211222_012152233](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/a/6a464d88244f5c753ce1993d06e4731ecce4ce36.jpeg)

---

_[View the full topic](https://forum.onefinitycnc.com/t/custom-touch-probe/9723)._