# Cutting Plastic (HDPE) on the Onefinity CNC (with video and vectric file) **URL:** \ **Category:** Plastic\ **Created:** [April 8, 2022, 5:43pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340 "2022-04-08T17:43:18Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [April 8, 2022, 5:43pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/1 "2022-04-08T17:43:18Z")
[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/0/0f54bdf5b0660edcda2e132f0004a7cfa6470322.jpeg "Cutting Plastic (HDPE) on the Onefinity CNC") ](https://www.youtube.com/watch?v=dXyXD28kHvo) [Canadian Flag.crv](https://forum.onefinitycnc.com/uploads/short-url/8asDaK3L6BU68MpgkRgrRUVBCQ8.crv) (367 KB) ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [April 8, 2022, 6:23pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/3 "2022-04-08T18:23:09Z")
Looks great. Where did you source your material? I live just south of you. ---
**Author:** ![Machinist](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/machinist/32/36465_2.png) [@Machinist](https://forum.onefinitycnc.com/u/Machinist)\ **Post date:** [April 8, 2022, 7:11pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/4 "2022-04-08T19:11:07Z")
Tom, not sure about Canadian suppliers, but you can get small pre-cut pieces from Inventables. I’ve bought it a few times. > **[HDPE | Inventables](https://www.inventables.com/categories/materials/plastic/hdpe)** > > Find innovative HDPE products for design, art, and prototyping. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [April 8, 2022, 8:45pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/5 "2022-04-08T20:45:35Z")
link is in the video description! ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [April 8, 2022, 10:11pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/6 "2022-04-08T22:11:49Z")
Thank you, but I do not see a link to where you purchased the HDPE. ---
**Author:** ![GordK](https://avatars.discourse-cdn.com/v4/letter/g/f0a364/32.png) [@GordK](https://forum.onefinitycnc.com/u/GordK)\ **Post date:** [April 8, 2022, 11:02pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/7 "2022-04-08T23:02:26Z")
Click on the “Youtube” symbol in the bottom right corner of the video; once in Youtube, click on “Show More” under the video; click on the link to Amazon beside “Material used”; it will take you to the corresponding page on Amazon, in your case: Amazon.ca ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [April 8, 2022, 11:07pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/8 "2022-04-08T23:07:24Z")
Thank you. I didn’t think to watch in ‘on’ Youtube. I assumed they meant the information was in the video, like the milling info text that appeared during the video. I use the ‘show more’ all the time to get additional information from the hundreds of CNC videos I watch! ---
**Author:** ![kriaz101](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/kriaz101/32/32881_2.png) [@kriaz101](https://forum.onefinitycnc.com/u/kriaz101)\ **Post date:** [April 9, 2022, 5:10pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/9 "2022-04-09T17:10:29Z")
I have not personally used this company but heard a lot about them. They appear to have a wide variety of engraving/cutting materials including plastics, vinyl, and various sign making materials. > **[JPPlus: Engraving, Sublimation, Heat Transfer & UV-LED](https://www.jpplus.com/)** > > Johnson Plastics Plus is your home for products and equipment for laser and rotary engraving, sublimation, heat transfer printing and UV-LED printing. ---
**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\ **Post date:** [April 9, 2022, 7:30pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/10 "2022-04-09T19:30:02Z")
I didn’t realize you could carve a Canadian flag using Imperial toolpath settings without opening a dimensional rift. ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [April 9, 2022, 7:35pm UTC](https://forum.onefinitycnc.com/t/cutting-plastic-hdpe-on-the-onefinity-cnc-with-video-and-vectric-file/12340/11 "2022-04-09T19:35:43Z")
It did. I live about 30 minutes south of their location and I felt it. 😁