# Delta 36-L352 Insert Plate

**URL:** <https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750>\
**Category:** Filefinity (Ready To Run File Sharing Site)\
**Created:** [July 3, 2024, 4:31pm UTC](https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750 "2024-07-03T16:31:29Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![troberts](https://avatars.discourse-cdn.com/v4/letter/t/f9ae1b/32.png) [@troberts](https://forum.onefinitycnc.com/u/troberts)\
**Post date:** [July 3, 2024, 4:31pm UTC](https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750/1 "2024-07-03T16:31:29Z")

</div>

I have an older Delta Table Saw (36-L352) and have been looking for a good SVG file for a Zero Clearance Template. Any suggestions or leads would be great!

---

<div class="post-metadata">

**Author:** ![RandomPoster](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@RandomPoster](https://forum.onefinitycnc.com/u/RandomPoster)\
**Post date:** [July 3, 2024, 6:36pm UTC](https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750/2 "2024-07-03T18:36:58Z")

</div>

This might be the one you want:

> **[Delta Unisaw Cabinet Table Saw Throat Plate](https://cutrocket.com/p/61fb5088adb4d)**
>
> This is a throat plate for a Delta Unisaw cabinet table saw. The holes are for M6 set screws. This fits a 1/2" or smaller blade or dado stack. Feel free to adjust the hole size with the provided CAD file.

I created my own, but I don’t have that particular saw.

---

<div class="post-metadata">

**Author:** ![troberts](https://avatars.discourse-cdn.com/v4/letter/t/f9ae1b/32.png) [@troberts](https://forum.onefinitycnc.com/u/troberts)\
**Post date:** [July 3, 2024, 9:58pm UTC](https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750/3 "2024-07-03T21:58:10Z")

</div>

I tried to download this file but it is empty.

---

<div class="post-metadata">

**Author:** ![RandomPoster](https://avatars.discourse-cdn.com/v4/letter/r/919ad9/32.png) [@RandomPoster](https://forum.onefinitycnc.com/u/RandomPoster)\
**Post date:** [July 4, 2024, 1:38am UTC](https://forum.onefinitycnc.com/t/delta-36-l352-insert-plate/27750/4 "2024-07-04T01:38:30Z")

</div>

Bummer. Not my file, just one I happened to remember in passing.