# Do I need a torque wrench?

**URL:** https://forum.onefinitycnc.com/t/do-i-need-a-torque-wrench/33828
**Category:** Accessories
**Created:** [June 12, 2025, 2:46am UTC](https://forum.onefinitycnc.com/t/do-i-need-a-torque-wrench/33828 "2025-06-12T02:46:56Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![TommyObar](https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/32.png) [@TommyObar](https://forum.onefinitycnc.com/u/TommyObar)
#### Post date: [June 12, 2025, 3:56pm UTC](https://forum.onefinitycnc.com/t/do-i-need-a-torque-wrench/33828/3 "2025-06-12T15:56:24Z")

</div>

> [@Z axis set screws are stripped](https://forum.onefinitycnc.com/t/z-axis-set-screws-are-stripped/30714/14):
>
> I had issues stripping bolts on other tools too, so finally bought a torque wrench. [LEXIVON Bike Torque Wrench 1/4-Inch Dr. 15-Piece Kit | 72-Tooth Gear, Dual-Direction Click Type 2~26 Nm / 17.7~230.1 in-lb (LX-191) - Amazon.com](https://www.amazon.com/dp/B0BH57YJ8Z?tag=benmyers-20)

---

_[View the full topic](https://forum.onefinitycnc.com/t/do-i-need-a-torque-wrench/33828)._