# Does anyone have a post they can please email me? (mastercam) **URL:** \ **Category:** MasterCam\ **Created:** [March 22, 2026, 8:36pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958 "2026-03-22T20:36:17Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![dfaak](https://avatars.discourse-cdn.com/v4/letter/d/90db22/32.png) [@dfaak](https://forum.onefinitycnc.com/u/dfaak)\ **Post date:** [March 22, 2026, 8:36pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/1 "2026-03-22T20:36:17Z")
I’m tired I’ve been looking for a month for a post with 4th axis capability for masso and its like everyone’s just not into sharing. I would be so appreciative if someone could help me out. I’ve given up on trying to edit the mpmaster. [Deanfaak2@gmail.com](mailto:Deanfaak2@gmail.com) if you can help me out. ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [March 22, 2026, 9:51pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/2 "2026-03-22T21:51:11Z")
You might want to reach out directly to MASSO to see if they have one made for Mastercam. ---
**Author:** ![dfaak](https://avatars.discourse-cdn.com/v4/letter/d/90db22/32.png) [@dfaak](https://forum.onefinitycnc.com/u/dfaak)\ **Post date:** [March 25, 2026, 6:43pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/3 "2026-03-25T18:43:15Z")
I have any they just refer you to their page with the postprocessors as if that’s somehow helpful when it’s clearly not there.. I’ve seen several users here successfully made a working post but due to the nature of Mastercam they can’t post them publicly but are welcome to share them in private. I’m just hoping to reach them with this post. ---
**Author:** ![JimmyBuckets](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@JimmyBuckets](https://forum.onefinitycnc.com/u/JimmyBuckets)\ **Post date:** [March 26, 2026, 12:09am UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/4 "2026-03-26T00:09:36Z")
Hi could you not just take a 4th axis post like a Fanuc post that runs standard G code and run that? I think Masso uses standard gcode. https://www.youtube.com/embed/videoseries?list=PLGZZqcCo3nJWHpBPMhJKMkTjXasrKoytH&wmode=transparent&rel=0&autohide=1&showinfo=1&enablejsapi=1 Not sure if there is anything worthwhile in this play list for you. ---
**Author:** ![dfaak](https://avatars.discourse-cdn.com/v4/letter/d/90db22/32.png) [@dfaak](https://forum.onefinitycnc.com/u/dfaak)\ **Post date:** [March 26, 2026, 6:22pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/5 "2026-03-26T18:22:30Z")
Yeah okay, I could see that my question is what needs to be changed between Fanuc and Masso? ---
**Author:** ![JimmyBuckets](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@JimmyBuckets](https://forum.onefinitycnc.com/u/JimmyBuckets)\ **Post date:** [March 26, 2026, 7:13pm UTC](https://forum.onefinitycnc.com/t/does-anyone-have-a-post-they-can-please-email-me-mastercam/37958/6 "2026-03-26T19:13:16Z")
Why not just pull a standard Fanuc and run a sim to see if it works? I don’t write my own PP I ain’t that smart 🤓