# Downgrade my Update

**URL:** <https://forum.onefinitycnc.com/t/downgrade-my-update/17283>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [December 10, 2022, 7:18am UTC](https://forum.onefinitycnc.com/t/downgrade-my-update/17283 "2022-12-10T07:18:39Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\
**Post date:** [December 10, 2022, 2:16pm UTC](https://forum.onefinitycnc.com/t/downgrade-my-update/17283/2 "2022-12-10T14:16:48Z")

</div>

Morning Philip,

Yes you most certainly can roll back your Firmware, this post explains exactly how to do it.

> [@How to reflash the operating system on the Onefinity BB controller (Full SD card image)](https://forum.onefinitycnc.com/t/how-to-reflash-the-operating-system-on-the-onefinity-full-sd-card-image/5659):
>
> There are times when you may have a file go corrupt or (advanced) users start poking under the hood and may need to reflash the entire vanilla image to the sd card. This process is essentially reinstalling the Onefinity operating system from scratch. This process is only for advanced users OR if you were directed to this via support. If you are looking to update the firmware from a controller that is working properly, do not use this method, look for the update file in the ‘firmware updates’ s…

-Alex

---

_[View the full topic](https://forum.onefinitycnc.com/t/downgrade-my-update/17283)._