# Drag chain setup

**URL:** <https://forum.onefinitycnc.com/t/drag-chain-setup/6184>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 16, 2021, 5:55pm UTC](https://forum.onefinitycnc.com/t/drag-chain-setup/6184 "2021-06-16T17:55:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Morelli](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/morelli/32/23072_2.png) [@Morelli](https://forum.onefinitycnc.com/u/Morelli)\
**Post date:** [June 16, 2021, 5:55pm UTC](https://forum.onefinitycnc.com/t/drag-chain-setup/6184/1 "2021-06-16T17:55:43Z")

</div>

Hey folks, would anyone know the dimensions for the route1 drag chain aluminum angle piece? On the road and want to pick up but forgot what size aluminum angle to buy. Any response appreciated.

---

<div class="post-metadata">

**Author:** ![Almtchncn](https://avatars.discourse-cdn.com/v4/letter/a/46a35a/32.png) [@Almtchncn](https://forum.onefinitycnc.com/u/Almtchncn)\
**Post date:** [June 16, 2021, 7:01pm UTC](https://forum.onefinitycnc.com/t/drag-chain-setup/6184/2 "2021-06-16T19:01:19Z")

</div>

If you are buying from etsy, route one wood designs, the aluminum channel is 1/16th inch thick by 3/4 inch by 3/4 inch by 40 inches long. I bought mine at menards.

---

<div class="post-metadata">

**Author:** ![Morelli](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/morelli/32/23072_2.png) [@Morelli](https://forum.onefinitycnc.com/u/Morelli)\
**Post date:** [June 16, 2021, 7:45pm UTC](https://forum.onefinitycnc.com/t/drag-chain-setup/6184/3 "2021-06-16T19:45:05Z")

</div>

Thanks! Appreciate the quick response!