# Drag chain upgrade from onfinity

**URL:** <https://forum.onefinitycnc.com/t/drag-chain-upgrade-from-onfinity/24244>\
**Category:** Uncategorized\
**Created:** [December 26, 2023, 7:27pm UTC](https://forum.onefinitycnc.com/t/drag-chain-upgrade-from-onfinity/24244 "2023-12-26T19:27:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![makingmagick](https://avatars.discourse-cdn.com/v4/letter/m/a698b9/32.png) [@makingmagick](https://forum.onefinitycnc.com/u/makingmagick)\
**Post date:** [December 26, 2023, 7:27pm UTC](https://forum.onefinitycnc.com/t/drag-chain-upgrade-from-onfinity/24244/1 "2023-12-26T19:27:47Z")

</div>

I ordered the update drag chains for my X-35 wood worker. I found an install video that Onefinity did for this, but it only includes the X rail!  
I have questions, but they are all about the Y rail! On the video I asked about it and was told it was “similar to the X-rail” don’t know how they would be…

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/a/9aa617743d8ff805306156de10782792792ed1ff.jpeg "Original & Pro Series Drag Chain Install | Support Video") ](https://www.youtube.com/watch?v=B7gkKGBFUEM)

Questions:  
How does the Y rail connect to the X rail?  
Where does the channel for the Y rail chains attach? I have the QCW? does it attach to that or the machine rails?  
How long are the cords coming from the end of the Y-rail? do I need extensions?

Would be nice to see the ENTIRE install and not a disconnected rail…

Thanks!
