# Drill holes different every time (problem with machine?)

**URL:** <https://forum.onefinitycnc.com/t/drill-holes-different-every-time-problem-with-machine/24912>\
**Category:** Uncategorized\
**Created:** [January 25, 2024, 12:24am UTC](https://forum.onefinitycnc.com/t/drill-holes-different-every-time-problem-with-machine/24912 "2024-01-25T00:24:19Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![chasingMango](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/chasingmango/32/28977_2.png) [@chasingMango](https://forum.onefinitycnc.com/u/chasingMango)\
**Post date:** [September 6, 2024, 1:54pm UTC](https://forum.onefinitycnc.com/t/drill-holes-different-every-time-problem-with-machine/24912/8 "2024-09-06T13:54:47Z")

</div>

Hi Ken, sorry for super late reply, I was going through my alerts. I found that the problem was because I had removed the red plastic bushings from the motor couplers, and this caused the motors to not work properly and be imprecise. When I replaced the bushings, everything worked fine!

> [@Jitter issue - jagged circle](https://forum.onefinitycnc.com/t/jitter-issue-jagged-circle/27742/19):
>
> lol. Just proves you are not the only one slight_smile

---

_[View the full topic](https://forum.onefinitycnc.com/t/drill-holes-different-every-time-problem-with-machine/24912)._
