# Drilling through QCW spoilboard to make dog holes? **URL:** \ **Category:** Quick Change Wasteboard Frame\ **Created:** [October 17, 2021, 11:16pm UTC](https://forum.onefinitycnc.com/t/drilling-through-qcw-spoilboard-to-make-dog-holes/8352 "2021-10-17T23:16:07Z")\ **Posts on this page:** 1\ **Showing post:** 14
**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\ **Post date:** [January 26, 2022, 4:44am UTC](https://forum.onefinitycnc.com/t/drilling-through-qcw-spoilboard-to-make-dog-holes/8352/14 "2022-01-26T04:44:55Z")
Hey Randy, hey Bob, hey all, On my [Veritas Worksurface](http://www.veritastools.com/Products/Page.aspx?p=732), since many years I use these [Veritas® Bench Blades](http://www.veritastools.com/Products/Page.aspx?p=513) **entirely made of steel** (cast & turned) which are available **[here with either 3/4″ (19.05 mm) or 20 mm post](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade)**, and a [1/4-20 T-Bolt](http://www.veritastools.com/Products/Page.aspx?p=739) version is also available. [![05G2210L](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/2/28a27d313d2dbcc8aeeb5af403af8ce6e2cd0dde.jpeg) Veritas® Bench Blade](http://www.veritastools.com/Products/Page.aspx?p=513) They do not lift the workpiece, their jaw face has 5° inward cant. Their jaw projects 1/4″ (6.35 mm) above work surface. [![05G2210-veritas-bench-blade-3-4-inch-standard-post-u-04-r__cropped1_50pct](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/a/5a0e02621876a251ab5eec099f01a761a46bf669.png)](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade) Also there is a version with a Wedge-lock post that anchors firmly in a through-hole in material as thin as 5/8″ (15.9 mm) (depending on the strength of the material) or in a blind hole that is a minimum of 1 3/8″ deep (38.1 mm). [![05G2212-veritas-bench-blade-3-4-inch-wedge-lock-post-i-01-r__cropped1_50pct](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/4/b41b5ea69992fd9ba93263cc11a22e0a686d2a0d.png) Veritas Bench Blade - Lee Valley Tools](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade) * * * EDIT 2023-11-09: Some links above seem broken. Here recent links that work, I will put them in soon. - [Veritas Worksurface – veritastools.ca](https://www.veritastools.ca/en-ca/shop/tools/workshop/workbenches/work-surfaces/73498-veritas-worksurface) - [Veritas Worksurface – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/work-surfaces/73498-veritas-worksurface) - [Item 13K1020, Veritas **1/4-20 T-Slot Track Bench Blade** – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade?item=13K1020) - [Item 05G2210, Veritas Bench Blade, **3/4" Standard Post** – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade?item=05G2210) - [Item 05G2212, Veritas Bench Blade, **3/4" Wedge-Lock Post** – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade?item=05G2212) - [Item 05G2213, Veritas Bench Blade, **20mm Standard Post** – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade?item=05G2213) - [Item 05G2214, Veritas Bench Blade, **20mm Wedge-Lock Post** – leevalley.com](https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/64685-veritas-bench-blade?item=05G2214) --- _[View the full topic](https://forum.onefinitycnc.com/t/drilling-through-qcw-spoilboard-to-make-dog-holes/8352)._