# Dust Boot Adjustment Modification

**URL:** <https://forum.onefinitycnc.com/t/dust-boot-adjustment-modification/23086>\
**Category:** Suck It Dust Boot\
**Created:** [October 31, 2023, 4:08pm UTC](https://forum.onefinitycnc.com/t/dust-boot-adjustment-modification/23086 "2023-10-31T16:08:50Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![RALMAR-Mike](https://avatars.discourse-cdn.com/v4/letter/r/a5b964/32.png) [@RALMAR-Mike](https://forum.onefinitycnc.com/u/RALMAR-Mike)\
**Post date:** [October 31, 2023, 4:08pm UTC](https://forum.onefinitycnc.com/t/dust-boot-adjustment-modification/23086/1 "2023-10-31T16:08:51Z")

</div>

I made a minor modification to the Suck-It Dust Boot mounts that makes adjustment faster and easier…others may wish to do the same. 🙂

 ![Suck-It Mod](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/5/054e0fdfa503be3c15086e78155a8f8ad82928b0.jpeg)

You will also need to enlarge the holes in the mounting arms to 6mm to accommodate the larger adjustment bolt.