# Dust boot compatible with atc and jtech laser

**URL:** <https://forum.onefinitycnc.com/t/dust-boot-compatible-with-atc-and-jtech-laser/37715>\
**Category:** Suck It Dust Boot\
**Created:** [March 2, 2026, 6:42am UTC](https://forum.onefinitycnc.com/t/dust-boot-compatible-with-atc-and-jtech-laser/37715 "2026-03-02T06:42:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tej181260](https://avatars.discourse-cdn.com/v4/letter/t/8dc957/32.png) [@Tej181260](https://forum.onefinitycnc.com/u/Tej181260)\
**Post date:** [March 2, 2026, 6:42am UTC](https://forum.onefinitycnc.com/t/dust-boot-compatible-with-atc-and-jtech-laser/37715/1 "2026-03-02T06:42:20Z")

</div>

Hi

Have anyone any updates whether there is a dust boot solution to Elite with 1) the possibility to handle rapid aut. tool change w/o removing the boot, 2) with the jtech laser mounted more or less as designed. It seems that a dust boot that is comp. with rapid atc is sorted out and in the market. However, what about maintaining the jtech laser still mounted? I don’t need drawings or cad files (would be helpful though), I just need a picture to understand the consept on how you have sorted out these issues. thanks a lot, Tomm-Erik