# Dust boot for RapidChange ATC?

**URL:** <https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649>\
**Category:** Suck It Dust Boot\
**Created:** [January 28, 2025, 10:45am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649 "2025-01-28T10:45:13Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![deafgoose](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@deafgoose](https://forum.onefinitycnc.com/u/deafgoose)\
**Post date:** [January 28, 2025, 10:45am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/1 "2025-01-28T10:45:13Z")

</div>

When will the dust boot for RapidChange ATC become available?

---

<div class="post-metadata">

**Author:** ![robcnc](https://avatars.discourse-cdn.com/v4/letter/r/a587f6/32.png) [@robcnc](https://forum.onefinitycnc.com/u/robcnc)\
**Post date:** [January 28, 2025, 12:59pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/2 "2025-01-28T12:59:22Z")

</div>

> [@Suckit SM status](https://forum.onefinitycnc.com/t/suckit-sm-status/30400/3):
>
> First small batch of ATCs ship end of Feb. We are still finalizing the SUCK IT SM that is atc compatible. We hope to have it up for preorder before the atc ships. We will do a email blast, social media blast, and forum post when its ready for preorder. When it’s ready, you will definitely know!

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [January 28, 2025, 2:44pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/3 "2025-01-28T14:44:02Z")

</div>

I have the Rapidchange ATC direct from RC, not 1F and it works amazing, I ordered a dust boot from [https://www.franciscreation.com](https://www.franciscreation.com) after seeing it in action on YT, it gets here Thursday so I will know more after install but also looks to work very well and simple to install.  
Anyway my 2cents.  
Pat

---

<div class="post-metadata">

**Author:** ![deafgoose](https://avatars.discourse-cdn.com/v4/letter/d/a587f6/32.png) [@deafgoose](https://forum.onefinitycnc.com/u/deafgoose)\
**Post date:** [January 28, 2025, 2:58pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/5 "2025-01-28T14:58:48Z")

</div>

Whoa. That’s slick! keep us updated on how you like it. I may just order one myself. 🙂

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [February 6, 2025, 12:40am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/6 "2025-02-06T00:40:39Z")

</div>

Got the dust boot, very easy install but there have been an issue or two or maybe just one.  
First the location of the ATC vertically is important, I found with mine that the brush on the dust boot would trigger the tool detection and shut it all down, I ended up milling a pocket .700 deep to set the ATC in ind this solved the problem. Also you do need to set the z location you want the brush to move down to when you start the machine, this is pretty normal but it will not work if you don’t ( very easy to do and takes about 4 seconds) Lastly the dust boot is very nicely made, 3D printed of course but very nice but it is a little flimsy, this does not affect the operation at all but just feels flimsy, overall I am very satisfied with it and no regrets at all. I would buy it again, be interesting to see what 1F comes up with.  
Pat

---

<div class="post-metadata">

**Author:** ![dassem](https://avatars.discourse-cdn.com/v4/letter/d/e480ec/32.png) [@dassem](https://forum.onefinitycnc.com/u/dassem)\
**Post date:** [April 4, 2025, 3:26am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/7 "2025-04-04T03:26:44Z")

</div>

@OnefinityCNC - Any update on the revised dust boot for redline spindles with ATC support?

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [April 4, 2025, 2:14pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/8 "2025-04-04T14:14:01Z")

</div>

i would like to know that as well.

---

<div class="post-metadata">

**Author:** ![Borgorl](https://avatars.discourse-cdn.com/v4/letter/b/87869e/32.png) [@Borgorl](https://forum.onefinitycnc.com/u/Borgorl)\
**Post date:** [April 4, 2025, 2:24pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/9 "2025-04-04T14:24:23Z")

</div>

Last update I got was from early February and they said it was going to be announced very soon, which again was 2 months ago

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [April 4, 2025, 3:02pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/10 "2025-04-04T15:02:58Z")

</div>

Working on the Product listing now! (Much soon(er)) 🙂

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [April 4, 2025, 3:25pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/11 "2025-04-04T15:25:55Z")

</div>

there’s that phrase again. (very soon)

---

<div class="post-metadata">

**Author:** ![3D-CNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/3d-cnc/32/33076_2.png) [@3D-CNC](https://forum.onefinitycnc.com/u/3D-CNC)\
**Post date:** [April 4, 2025, 3:44pm UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/12 "2025-04-04T15:44:08Z")

</div>

Yeah, I had to go ahead and buy the double barrel dust boot because I could not wait for the one they are having designed. So since I already spent $150 on one, I do not see myself buying another one just to use the tool changer. I will wait until I get the tool changer and then design whatever I need to make it work. I am not paying another $150 for something I waited 6 months on.

---

<div class="post-metadata">

**Author:** ![siganberg](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@siganberg](https://forum.onefinitycnc.com/u/siganberg)\
**Post date:** [May 13, 2025, 12:57am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/13 "2025-05-13T00:57:35Z")

</div>

For the regular version RapidChangeATC and non spindle mount dust boot, my product can be your alternative:

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/b/1b4e0ccdcfd2d6f601829b44bd1c85f7b11d4085.jpeg "Quick Test of Masso with RapidChangeATC and AutoDustBoot") ](https://www.youtube.com/watch?v=rpNU-7I8hio)

---

<div class="post-metadata">

**Author:** ![dassem](https://avatars.discourse-cdn.com/v4/letter/d/e480ec/32.png) [@dassem](https://forum.onefinitycnc.com/u/dassem)\
**Post date:** [June 5, 2025, 1:18am UTC](https://forum.onefinitycnc.com/t/dust-boot-for-rapidchange-atc/30649/14 "2025-06-05T01:18:29Z")

</div>

ATC just arrived and came with the suck it dustboot to work with the ATC. Nice!
