# Dust Collection Turn on

**URL:** <https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [December 23, 2024, 10:15pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107 "2024-12-23T22:15:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![KevTN](https://avatars.discourse-cdn.com/v4/letter/k/fbc32d/32.png) [@KevTN](https://forum.onefinitycnc.com/u/KevTN)\
**Post date:** [December 23, 2024, 10:15pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107/1 "2024-12-23T22:15:51Z")

</div>

I am trying to get my vacuum to turn on with my Masso. I am have tried to use the G8 command in the post processor. I have also tried to use the Coolant button without any success. I can hear a click when I use the coolant button. My vacuum is a DeWalt Stealth.

Woodworker Elite. Right now using the Router11 ER11 router but have ordered the Redline 110v 80mm spindle.

It is probabraly something simple I am missing.

Thank you, and if I can not login for a day or two I hope everyone has a very Merry Christmas!

Kevin

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 23, 2024, 11:22pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107/2 "2024-12-23T23:22:08Z")

</div>

M8 is the correct command

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [December 24, 2024, 1:38pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107/3 "2024-12-24T13:38:33Z")

</div>

Just a thought, if you hear a click and no vacuum, do you have a separate power going to the back of the Masso black box to run the Vacuum?  
Pat

---

<div class="post-metadata">

**Author:** ![KevTN](https://avatars.discourse-cdn.com/v4/letter/k/fbc32d/32.png) [@KevTN](https://forum.onefinitycnc.com/u/KevTN)\
**Post date:** [December 24, 2024, 2:19pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107/4 "2024-12-24T14:19:32Z")

</div>

You are correct. I did not realize I need to have the second power to the back of the box until I rewatched a YT video. I am looking around the house to see if I still have one of those power cords. Thank you!

I appreciate yall helping this old codger out. Merry Christmas!!

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [December 24, 2024, 2:44pm UTC](https://forum.onefinitycnc.com/t/dust-collection-turn-on/30107/5 "2024-12-24T14:44:59Z")

</div>

One old codger to another,  
Merry Christmas