# Easy ATC Software Beta for Realtime Controller (Official FAQ)

**URL:** <https://forum.onefinitycnc.com/t/easy-atc-software-beta-for-realtime-controller-official-faq/38210>\
**Category:** Onefinity Easy ATC (Automatic Tool Changer)\
**Created:** [April 19, 2026, 12:14am UTC](https://forum.onefinitycnc.com/t/easy-atc-software-beta-for-realtime-controller-official-faq/38210 "2026-04-19T00:14:29Z")\
**Posts on this page:** 1\
**Showing post:** 27

<div class="post-metadata">

**Author:** ![enyegaard](https://avatars.discourse-cdn.com/v4/letter/e/f1d935/32.png) [@enyegaard](https://forum.onefinitycnc.com/u/enyegaard)\
**Post date:** [April 24, 2026, 8:42pm UTC](https://forum.onefinitycnc.com/t/easy-atc-software-beta-for-realtime-controller-official-faq/38210/27 "2026-04-24T20:42:39Z")

</div>

Everything is working perfectly as long as I am using one of the 4 bits in the ATC. But if I want to use another bit ( ie. tool #5) it unloads the current tool and just hangs. Expected it to move to the manual change position. There must be a setting that I am missing. Please let me know.

---

_[View the full topic](https://forum.onefinitycnc.com/t/easy-atc-software-beta-for-realtime-controller-official-faq/38210)._