# Elite/ATC/dust boot

**URL:** <https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064>\
**Category:** Troubleshooting (Elite Series)\
**Created:** [February 21, 2025, 6:38pm UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064 "2025-02-21T18:38:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Morelli](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/morelli/32/23072_2.png) [@Morelli](https://forum.onefinitycnc.com/u/Morelli)\
**Post date:** [February 21, 2025, 6:38pm UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064/1 "2025-02-21T18:38:47Z")

</div>

For those of you with Elites and RC ATC what are you using besides sidekick for your dust boot that is compatible with the ATC?

Any ATC pro/con comments welcome.

I’m forever contemplating a Masso upgrade with ATC and looking at all options.  
Thanks-

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [February 21, 2025, 9:51pm UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064/2 "2025-02-21T21:51:12Z")

</div>

I have the RC ATC from Rapidchange, I went with the easy boot from Francis Creations.  
The combination works very well, I am especially pleased with the ATC from RC, it works very well.  
Pat

---

<div class="post-metadata">

**Author:** ![Morelli](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/morelli/32/23072_2.png) [@Morelli](https://forum.onefinitycnc.com/u/Morelli)\
**Post date:** [February 21, 2025, 10:13pm UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064/3 "2025-02-21T22:13:14Z")

</div>

Thanks Pat,

I appreciate the response. I looked at a youtube vid of that product. Do you find the trimmer for raising and lowering the boot could use a few less turns or is it about right? The video only showed a brief adjustment. It’s a minor detail, just wondered. Lastly, do you use a 4" or 2.5" and if 2.5 does it pull pretty well?

Thanks!

---

<div class="post-metadata">

**Author:** ![PezWoodworks](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@PezWoodworks](https://forum.onefinitycnc.com/u/PezWoodworks)\
**Post date:** [February 21, 2025, 11:55pm UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064/4 "2025-02-21T23:55:42Z")

</div>

The knob is not connected to the lead screw, it is an encoder and when you turn the knob it is quite fast to raise and lower the boot, seems like a 3/4 of a turn does it. I have the 2-1/2 vacuum connection and so far it works pretty good, I have used the Suck It from 1F and the Nighthawk and this one is comparable, my vacuum is just a shop vac with a long hose.  
Hope this helps  
Pat

---

<div class="post-metadata">

**Author:** ![Morelli](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/morelli/32/23072_2.png) [@Morelli](https://forum.onefinitycnc.com/u/Morelli)\
**Post date:** [February 22, 2025, 12:23am UTC](https://forum.onefinitycnc.com/t/elite-atc-dust-boot/31064/5 "2025-02-22T00:23:04Z")

</div>

Great! Thanks again Pat.
