# Elite Series Doc: Removing the screen mount causes the Y rail bolts to stick out too long

**URL:** <https://forum.onefinitycnc.com/t/elite-series-doc-removing-the-screen-mount-causes-the-y-rail-bolts-to-stick-out-too-long/19748>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [March 29, 2023, 4:33pm UTC](https://forum.onefinitycnc.com/t/elite-series-doc-removing-the-screen-mount-causes-the-y-rail-bolts-to-stick-out-too-long/19748 "2023-03-29T16:33:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 29, 2023, 4:33pm UTC](https://forum.onefinitycnc.com/t/elite-series-doc-removing-the-screen-mount-causes-the-y-rail-bolts-to-stick-out-too-long/19748/1 "2023-03-29T16:33:13Z")

</div>

The Elite series with the Masso Touch controller is designed with the mount for the screen on the left Y rail.

Some users may want to mount their screen elsewhere, which means removing the mount. This will cause the mounting bolts to protrude out toward the Y rail gantry block, preventing the Y rail from homing.

See Picture:

 ![thumbnail_EliteStep](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/6/46380dc53921b78a4b32c898abf70bf072dd2c39.jpeg)

* * *

Users who want this have two options to remedy the long bolt issue:

1. Acquire shorter bolts (X2): [M5 x 70mm Long](https://www.mcmaster.com/91290A272/)
2. Use washers on the bolt heads that are the same thickness as the screen mount.