# Elite Series Foreman with Masso - FIRST LOOK (Video) via Myers Woodshop

**URL:** https://forum.onefinitycnc.com/t/elite-series-foreman-with-masso-first-look-video-via-myers-woodshop/17935
**Category:** Elite Series (Masso & Redline) (Gen 1)
**Created:** [January 7, 2023, 10:01pm UTC](https://forum.onefinitycnc.com/t/elite-series-foreman-with-masso-first-look-video-via-myers-woodshop/17935 "2023-01-07T22:01:47Z")
**Posts on this page:** 1
**Showing post:** 10

<div class="post-metadata">

### Author: ![EricV](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ericv/32/21436_2.png) [@EricV](https://forum.onefinitycnc.com/u/EricV)
#### Post date: [January 8, 2023, 2:39pm UTC](https://forum.onefinitycnc.com/t/elite-series-foreman-with-masso-first-look-video-via-myers-woodshop/17935/10 "2023-01-08T14:39:10Z")

</div>

I asked this in another thread. There seems to be some discrepancy but these machines are very early in development.

> [@Cable chain, is it large enough to include cooling lines](https://forum.onefinitycnc.com/t/cable-chain-is-it-large-enough-to-include-cooling-lines/17173):
>
> I’ve been looking at the pictures and videos of the new Elite series as I’m sure we all are. One thing I noticed is the cable chains do not look large enough to include cooling lines for a spindle. Onefinity, if this is the case maybe you can rethink the cable chain before you start production. I would imagine lots of people buying this class of machine will also use a spindle.

---

_[View the full topic](https://forum.onefinitycnc.com/t/elite-series-foreman-with-masso-first-look-video-via-myers-woodshop/17935)._