# Elite Series Z Slider Motor Break

**URL:** <https://forum.onefinitycnc.com/t/elite-series-z-slider-motor-break/23334>\
**Category:** Official 1F Elite (Gen 1) (MASSO) FAQs\
**Created:** [November 13, 2023, 2:09pm UTC](https://forum.onefinitycnc.com/t/elite-series-z-slider-motor-break/23334 "2023-11-13T14:09:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 13, 2023, 2:09pm UTC](https://forum.onefinitycnc.com/t/elite-series-z-slider-motor-break/23334/1 "2023-11-13T14:09:02Z")

</div>

**Elite Series Z Slider Motor Break**

 ![thumbnail_IMG_0395](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/7/77d01f56a4685a95c9df959c1a2e16f88d9e2bf2.jpeg)

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [December 2, 2023, 12:13am UTC](https://forum.onefinitycnc.com/t/elite-series-z-slider-motor-break/23334/2 "2023-12-02T00:13:23Z")

</div>

Listed on December 2, 2023, 12:13am UTC