# Elite Table Builds **URL:** \ **Category:** Elite Series (Masso & Redline) (Gen 1)\ **Created:** [January 19, 2023, 12:52am UTC](https://forum.onefinitycnc.com/t/elite-table-builds/18240 "2023-01-19T00:52:45Z")\ **Posts on this page:** 1\ **Showing post:** 128
**Author:** ![WTheelen](https://avatars.discourse-cdn.com/v4/letter/w/3bc359/32.png) [@WTheelen](https://forum.onefinitycnc.com/u/WTheelen)\ **Post date:** [November 24, 2023, 2:00am UTC](https://forum.onefinitycnc.com/t/elite-table-builds/18240/128 "2023-11-24T02:00:47Z")
Your craftsman ship is impressive. I tried creating half laps for my table but it didn’t go as well as I would’ve hoped. If you’re interested in adding in a vacuum table I had an idea that could integrate quite well into your design. > [@Table Improvements](https://forum.onefinitycnc.com/t/table-improvements/23242/13): > > Hey Wout, Notches like you show above on the inner parts of your anti-torsion box above only work against bending of the box if they are extremely precise (tight) and then all parts glued together (=so that the triangles are all mechanically closed) It is much simpler to have the third side of the triangle as a continuous top as Derek suggested. And with screws so you don’t need to get stability by ensuring 1.) and 2.) They are pretty precise. I did a test when I started and I need a ha… --- _[View the full topic](https://forum.onefinitycnc.com/t/elite-table-builds/18240)._