# Elite Table Builds

**URL:** <https://forum.onefinitycnc.com/t/elite-table-builds/18240>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [January 19, 2023, 12:52am UTC](https://forum.onefinitycnc.com/t/elite-table-builds/18240 "2023-01-19T00:52:45Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![RockingMallet](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rockingmallet/32/22313_2.png) [@RockingMallet](https://forum.onefinitycnc.com/u/RockingMallet)\
**Post date:** [January 30, 2023, 5:04am UTC](https://forum.onefinitycnc.com/t/elite-table-builds/18240/4 "2023-01-30T05:04:59Z")

</div>

I have been working on my Elite table design for awhile now before mine comes in.

due to the limitations of my shop I am going for a flip top table similar to Drew’s over as the Fisher’s Shop. I did purchase his plans, but basically redesigned 90% of it.  
this thing is going to be a beast @ 80" long by 22’ish " wide when folded.

The actual flip top is 48" x 65" torsion box.

 ![OF table 1](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/c/1c89822a721a633873a7029667423014a5fa06d2.jpeg)

also a quick video of it in action - still a few things to get worked out.  
looking to either have no legs (doubt it) or just on the front of which ever side is proud.

question: is the monitor/controller the only equipment I need to worry about finding a home for? the one thing i haven’t paid much mind to is a location for future spindle/eq. i did order the 80mm for future upgrade.

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/1/21f46b22705d5202d9ef35a60ecea3a0406bc390.jpeg "CNC Flip Top Table v49") ](https://www.youtube.com/watch?v=0msQ60xDZ48)

---

_[View the full topic](https://forum.onefinitycnc.com/t/elite-table-builds/18240)._