# Estopped message

**URL:** <https://forum.onefinitycnc.com/t/estopped-message/12378>\
**Category:** Uncategorized\
**Created:** [April 10, 2022, 4:21pm UTC](https://forum.onefinitycnc.com/t/estopped-message/12378 "2022-04-10T16:21:30Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![iamthenuke](https://avatars.discourse-cdn.com/v4/letter/i/4af34b/32.png) [@iamthenuke](https://forum.onefinitycnc.com/u/iamthenuke)\
**Post date:** [April 10, 2022, 4:21pm UTC](https://forum.onefinitycnc.com/t/estopped-message/12378/1 "2022-04-10T16:21:30Z")

</div>

Newbie here… Have been watching many You Tube videos on getting my feet wet. When I get an Estopped message on my screen … how am I able to abort/ get out of the attempted program? I am using a flattening file for a waste board 32 x 32. I originally made the waste board 32.125 x 32.125. So I’ll cut it down to 32 x 32 but still wanting to know how to get out of the Estopped message when it would appear on a future job.  
thanks

---

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [April 10, 2022, 4:36pm UTC](https://forum.onefinitycnc.com/t/estopped-message/12378/2 "2022-04-10T16:36:01Z")

</div>

You will likely need to hit the red estop picture on the controller interface to reset it and then re-home and re-zero the machine.

---

<div class="post-metadata">

**Author:** ![iamthenuke](https://avatars.discourse-cdn.com/v4/letter/i/4af34b/32.png) [@iamthenuke](https://forum.onefinitycnc.com/u/iamthenuke)\
**Post date:** [April 11, 2022, 1:21am UTC](https://forum.onefinitycnc.com/t/estopped-message/12378/3 "2022-04-11T01:21:40Z")

</div>

thank you for your help working on becoming more and more familiar with my new toy!
