# Excitement is building

**URL:** <https://forum.onefinitycnc.com/t/excitement-is-building/37171>\
**Category:** Gen 2 Elite Series\
**Created:** [January 12, 2026, 9:55pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171 "2026-01-12T21:55:20Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [January 12, 2026, 9:55pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/1 "2026-01-12T21:55:20Z")

</div>

Are all of you batch one folks getting excited? It is now only 2 more weeks till the end of the month and the beginning of gen 2 shipments. As a batch 2 guy I am getting amped up as well and I still have 6 weeks to wait. fingers crossed the estimates are accurate this time.

---

<div class="post-metadata">

**Author:** ![tank624](https://avatars.discourse-cdn.com/v4/letter/t/6f9a4e/32.png) [@tank624](https://forum.onefinitycnc.com/u/tank624)\
**Post date:** [January 13, 2026, 2:23pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/2 "2026-01-13T14:23:50Z")

</div>

Batch 1 guy here and yes getting excited to begin this new venture in my retirement to keep me busy and learning. have table ready and learning on Vectric as well as getting ideas for projects.

---

<div class="post-metadata">

**Author:** ![ppd417](https://avatars.discourse-cdn.com/v4/letter/p/9dc877/32.png) [@ppd417](https://forum.onefinitycnc.com/u/ppd417)\
**Post date:** [January 13, 2026, 9:47pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/3 "2026-01-13T21:47:05Z")

</div>

Same here. I ordered at 8:03 AM and ended up in batch 2! I’ve waited this long, I can wait another six weeks. 🙂

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [January 30, 2026, 1:54pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/4 "2026-01-30T13:54:55Z")

</div>

ok so now it is the end of January, has anyone of you gen2 batch 1 folks received notice yet? I am just looking to see if the shipping is actually happening as stated. Just excited not upset lol.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 30, 2026, 2:11pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/5 "2026-01-30T14:11:35Z")

</div>

We sent an email with the latest production update to every Gen 2 batch 1-4 customer.  
Here is the link incase you missed it:

> **[Onefinity Production Update 1/28/26](https://www.onefinitycnc.com/post/onefinity-production-update-1-28-26)**
>
> Onefinity Production Update January 28, 2026
> 
> We’re excited to share a production update on our Gen 2 CNC machines and the new Apprentice Series as we complete the final stages of preparation.on Update 6/25/25

---

<div class="post-metadata">

**Author:** ![tank624](https://avatars.discourse-cdn.com/v4/letter/t/6f9a4e/32.png) [@tank624](https://forum.onefinitycnc.com/u/tank624)\
**Post date:** [February 3, 2026, 10:15pm UTC](https://forum.onefinitycnc.com/t/excitement-is-building/37171/6 "2026-02-03T22:15:26Z")

</div>

No but did get email stating a few parts were held up in customs[Toronto] and hopefully shipped out this week