# Feed rate help touch

**URL:** <https://forum.onefinitycnc.com/t/feed-rate-help-touch/13078>\
**Category:** Uncategorized\
**Created:** [May 14, 2022, 3:59pm UTC](https://forum.onefinitycnc.com/t/feed-rate-help-touch/13078 "2022-05-14T15:59:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tfl](https://avatars.discourse-cdn.com/v4/letter/t/53a042/32.png) [@Tfl](https://forum.onefinitycnc.com/u/Tfl)\
**Post date:** [May 14, 2022, 3:59pm UTC](https://forum.onefinitycnc.com/t/feed-rate-help-touch/13078/1 "2022-05-14T15:59:23Z")

</div>

Is it possible to adjust feed rate from the touch screen while running cnc

---

<div class="post-metadata">

**Author:** ![wilsonpf](https://avatars.discourse-cdn.com/v4/letter/w/e68b1a/32.png) [@wilsonpf](https://forum.onefinitycnc.com/u/wilsonpf)\
**Post date:** [May 14, 2022, 4:37pm UTC](https://forum.onefinitycnc.com/t/feed-rate-help-touch/13078/2 "2022-05-14T16:37:04Z")

</div>

Not with the stock controller. You can with some other controllers.