# Feed speed higher **URL:** \ **Category:** Uncategorized\ **Created:** [July 28, 2024, 7:28pm UTC](https://forum.onefinitycnc.com/t/feed-speed-higher/28042 "2024-07-28T19:28:44Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Lynn66](https://avatars.discourse-cdn.com/v4/letter/l/848f3c/32.png) [@Lynn66](https://forum.onefinitycnc.com/u/Lynn66)\ **Post date:** [July 28, 2024, 7:28pm UTC](https://forum.onefinitycnc.com/t/feed-speed-higher/28042/1 "2024-07-28T19:28:44Z")
I k ow this has probably been asked a hundred times. I’m running build botics and it seams that the top feed speed is locked at 80 ipm. I have tools that can run at a higher speed, but the controller plugs in 80 ipm. Is there sa setting I change so I can run a higher speed? ---
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [July 28, 2024, 8:52pm UTC](https://forum.onefinitycnc.com/t/feed-speed-higher/28042/2 "2024-07-28T20:52:09Z")
That is controller by your cad. Top speed in the controller in x and y is 398, not 80. ---
**Author:** ![Lynn66](https://avatars.discourse-cdn.com/v4/letter/l/848f3c/32.png) [@Lynn66](https://forum.onefinitycnc.com/u/Lynn66)\ **Post date:** [July 29, 2024, 2:32pm UTC](https://forum.onefinitycnc.com/t/feed-speed-higher/28042/3 "2024-07-29T14:32:09Z")
Ok. I’ll check it out.