# Feedrate override?

**URL:** <https://forum.onefinitycnc.com/t/feedrate-override/18891>\
**Category:** Uncategorized\
**Created:** [February 19, 2023, 12:58am UTC](https://forum.onefinitycnc.com/t/feedrate-override/18891 "2023-02-19T00:58:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pricejohn621](https://avatars.discourse-cdn.com/v4/letter/p/e47774/32.png) [@Pricejohn621](https://forum.onefinitycnc.com/u/Pricejohn621)\
**Post date:** [February 19, 2023, 12:58am UTC](https://forum.onefinitycnc.com/t/feedrate-override/18891/1 "2023-02-19T00:58:01Z")

</div>

Hello, Just started using the Onefinity Buildbotics control and journeyman x50 but am not seeing anyway to federate override while running program. Is that possible? I’ve ran many hobby and industrial cancer controls but don’t see it here. Thank you!

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 19, 2023, 1:07am UTC](https://forum.onefinitycnc.com/t/feedrate-override/18891/2 "2023-02-19T01:07:00Z")

</div>

Hey John,

unfortunately feedrate override is not possible with the Onefinity Controller (it is a [feature requested](https://forum.onefinitycnc.com/t/adjustable-feedrate-and-spindle-speed/1014)), but with the Masso G3 Touch of the Elite Series.

What is possible with some VFDs, is [Temporarily Overriding Spindle Speed](https://forum.onefinitycnc.com/t/hitachi-vfd-connection/7328/29#temporarily-overriding-modbus-control-on-omron-and-hitachi-vfds-1)

Welcome to the forum!

---

<div class="post-metadata">

**Author:** ![Pricejohn621](https://avatars.discourse-cdn.com/v4/letter/p/e47774/32.png) [@Pricejohn621](https://forum.onefinitycnc.com/u/Pricejohn621)\
**Post date:** [February 19, 2023, 1:13am UTC](https://forum.onefinitycnc.com/t/feedrate-override/18891/3 "2023-02-19T01:13:50Z")

</div>

Thank you for the quick reply. Will they offer a masso control/motor upgrade kit sometime soon?

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [February 19, 2023, 1:19am UTC](https://forum.onefinitycnc.com/t/feedrate-override/18891/4 "2023-02-19T01:19:24Z")

</div>

[elite upgrade](https://forum.onefinitycnc.com/search?q=elite%20upgrade)