# Finally setup almost

**URL:** <https://forum.onefinitycnc.com/t/finally-setup-almost/27946>\
**Category:** Uncategorized\
**Created:** [July 20, 2024, 8:54pm UTC](https://forum.onefinitycnc.com/t/finally-setup-almost/27946 "2024-07-20T20:54:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jsbm](https://avatars.discourse-cdn.com/v4/letter/j/839c29/32.png) [@jsbm](https://forum.onefinitycnc.com/u/jsbm)\
**Post date:** [July 20, 2024, 8:54pm UTC](https://forum.onefinitycnc.com/t/finally-setup-almost/27946/1 "2024-07-20T20:54:42Z")

</div>

![IMG_2446](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/f/ef00686ed6f16de417eb9dd0a6aee6977784a554.jpeg)  
 ![IMG_2445](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/3/1/31afd1d670ce538c0e29e63c862ef85bdeb40c81.jpeg)  
 ![IMG_2447](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/1/811f8913497a7a93979f71b11e78c6569530044c.jpeg)

I finally unboxed my machine today after having it almost 3 years. I was very surprised that onefinity personalized a few pieces. You don’t see that kind of customer appreciation often and I appreciate it. With that said all I’m waiting for is t track so I can install the spoil board and get this thing up and running.