# Fine-tuning Gamepad Jog Speed

**URL:** <https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033>\
**Category:** Troubleshooting (X35/X50)\
**Created:** [April 14, 2023, 7:36pm UTC](https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033 "2023-04-14T19:36:53Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![makerjace](https://avatars.discourse-cdn.com/v4/letter/m/e47c2d/32.png) [@makerjace](https://forum.onefinitycnc.com/u/makerjace)\
**Post date:** [April 15, 2023, 4:54am UTC](https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033/21 "2023-04-15T04:54:02Z")

</div>

Or maybe even “feeds” instead of “speeds” to keep consistent with CNC terminology?

I also have to just say this project you’re working on @Brotron might just be the coolest thing I’ve seen a 1F used for. Hope you’re able to share the finished project someday. Would even be amazing to see continued updates as it progresses to show others what’s possible with big ideas.

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 15, 2023, 1:39pm UTC](https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033/22 "2023-04-15T13:39:28Z")

</div>

Hey Greg @Brotron, hey Jace,

> [@makerjace](#):
>
> I also have to just say this project you’re working on @Brotron might just be the coolest thing I’ve seen a 1F used for.

I would rather say _anything_ that you make Greg is absolutely stunning. I feel honored to have helped you, even it was only with such a small contribution.

---

<div class="post-metadata">

**Author:** ![Brotron](https://avatars.discourse-cdn.com/v4/letter/b/ee7513/32.png) [@Brotron](https://forum.onefinitycnc.com/u/Brotron)\
**Post date:** [April 15, 2023, 8:11pm UTC](https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033/23 "2023-04-15T20:11:14Z")

</div>

Thank you, that’s very kind. And your info helped amazingly. I rarely find a direct and exact fix when I need something to work outside of a supplied software interface. I wanted a speed of 650 mm/min, so I divided 10,000 by 650 and got 15.38. My guestimation “without knowing the full speed value” was 15, which was mostly luck btw:)

Quick math and conversions for anyone that is confused about getting an exact feed rate from the controller.

```
def changed(self):
    scale = 1.0
    if self.speed == 1: scale = 1.0 / 128.0
    if self.speed == 2: scale = 1.0 / 32.0
    if self.speed == 3: scale = 1.0 / 4.0

```

The 1.0 in the code is the full speed value = 10 meters per minute  
the code line for low speed (bottom green button) is: (if self.speed == 2: scale = 1.0 / (n))  
(n) being the variable to change in the code

Formula to change feed rate, meters per minute:  
10 divided by the desired feed rate = (n)

Formula to change feed rate, millimeters per minute:  
10,000 divided by the desired feed rate = (n)

Formula to change feed rate, feet per minute:  
32.8 divided by the desired feed rate = (n)

Formula to change feed rate, inches per minute:  
393.7 divided by the desired feed rate = (n)

[Previous page](https://forum.onefinitycnc.com/t/fine-tuning-gamepad-jog-speed/20033.md?page=1)
