# First spoil board

**URL:** <https://forum.onefinitycnc.com/t/first-spoil-board/20810>\
**Category:** Fusion 360\
**Created:** [May 30, 2023, 1:38pm UTC](https://forum.onefinitycnc.com/t/first-spoil-board/20810 "2023-05-30T13:38:00Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [May 30, 2023, 2:50pm UTC](https://forum.onefinitycnc.com/t/first-spoil-board/20810/3 "2023-05-30T14:50:02Z")

</div>

Hey @Gus, hey SkyKam,

> [@SkyKam](#):
>
> You will be able to keep the tool from going outside the machine limits.

And you don’t need to take tool diameter into account as there is enough extra room around the workarea for a tool overhang (see [Cutting area location](https://forum.onefinitycnc.com/t/cutting-area-location/1586/10)). This way you avoid corners not surfaced.

---

_[View the full topic](https://forum.onefinitycnc.com/t/first-spoil-board/20810)._