# Found the Makita for $99 USA **URL:** \ **Category:** Accessories\ **Created:** [November 30, 2022, 6:52pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963 "2022-11-30T18:52:36Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![phr0ze](https://avatars.discourse-cdn.com/v4/letter/p/bcef8e/32.png) [@phr0ze](https://forum.onefinitycnc.com/u/phr0ze)\ **Post date:** [November 30, 2022, 6:52pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/1 "2022-11-30T18:52:36Z")
My CNC arrives tomorrow but all the stores currently sell the router for $130ish. However I found Matter Hackers has it for $99. As a 3D printing professional, I use matter hackers all the time (I actually received another order from them yesterday.) They ship very fast but I didn’t think of the router until now. Unfortunately I will have to wait but glad to save the $30. I don’t know if it is ok to share sources for accessories, but I would have never thought of them for CNC. I’m so glad my 1FWW arrives tomorrow and to be a part of this community. John ---
**Author:** ![Borgorl](https://avatars.discourse-cdn.com/v4/letter/b/87869e/32.png) [@Borgorl](https://forum.onefinitycnc.com/u/Borgorl)\ **Post date:** [November 30, 2022, 7:55pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/2 "2022-11-30T19:55:58Z")
Thanks for the tip! Just picked up another one for $99. That will be for my router table and a backup for the Journeyman ---
**Author:** ![Avbates](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/avbates/32/31020_2.png) [@Avbates](https://forum.onefinitycnc.com/u/Avbates)\ **Post date:** [November 30, 2022, 10:24pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/3 "2022-11-30T22:24:51Z")
Take a look at the er11 router from Carbide Create. It is priced well and has a long power cable to reach all the way. It’s a well made Makita clone. ---
**Author:** ![phr0ze](https://avatars.discourse-cdn.com/v4/letter/p/bcef8e/32.png) [@phr0ze](https://forum.onefinitycnc.com/u/phr0ze)\ **Post date:** [November 30, 2022, 10:47pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/4 "2022-11-30T22:47:00Z")
That sounds good but I read only the Mikita is officially supported. I don’t want warranty issues. ---
**Author:** ![Wes\_Jac\_79](https://avatars.discourse-cdn.com/v4/letter/w/8797f3/32.png) [@Wes\_Jac\_79](https://forum.onefinitycnc.com/u/Wes_Jac_79)\ **Post date:** [November 30, 2022, 11:02pm UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/5 "2022-11-30T23:02:49Z")
Ii picked up a factory reman unit with a 2 yr warranty for $67 a couple weeks ago. Its hard to find them under the $130 mark. ---
**Author:** ![Avbates](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/avbates/32/31020_2.png) [@Avbates](https://forum.onefinitycnc.com/u/Avbates)\ **Post date:** [December 1, 2022, 12:37am UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/6 "2022-12-01T00:37:18Z")
Supported? The router is not electrically connected to the Onefinity. Stay Safe Best Regards ---
**Author:** ![phr0ze](https://avatars.discourse-cdn.com/v4/letter/p/bcef8e/32.png) [@phr0ze](https://forum.onefinitycnc.com/u/phr0ze)\ **Post date:** [December 1, 2022, 1:55am UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/7 "2022-12-01T01:55:32Z")
I dont know that. I dont have a 1F yet. But it was in this forum and 1F team never responded to say it wasn’t true. Once I have more experience I’m sure i’m ready to try other routers and spindles. But the info I see on this forum is what I have to go on for now. ---
**Author:** ![Avbates](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/avbates/32/31020_2.png) [@Avbates](https://forum.onefinitycnc.com/u/Avbates)\ **Post date:** [December 1, 2022, 2:30am UTC](https://forum.onefinitycnc.com/t/found-the-makita-for-99-usa/16963/8 "2022-12-01T02:30:48Z")
👍 sounds like a plan