# Full Size Router

**URL:** <https://forum.onefinitycnc.com/t/full-size-router/19958>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [April 11, 2023, 12:04am UTC](https://forum.onefinitycnc.com/t/full-size-router/19958 "2023-04-11T00:04:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rugar458](https://avatars.discourse-cdn.com/v4/letter/r/898d66/32.png) [@Rugar458](https://forum.onefinitycnc.com/u/Rugar458)\
**Post date:** [April 11, 2023, 12:04am UTC](https://forum.onefinitycnc.com/t/full-size-router/19958/1 "2023-04-11T00:04:21Z")

</div>

Is it possible to get a mount to use a full sized router 3.25 hp in the onefinity elite?

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 11, 2023, 12:29am UTC](https://forum.onefinitycnc.com/t/full-size-router/19958/2 "2023-04-11T00:29:39Z")

</div>

Hey Rugar458,

you can mount hand trim routers or spindles with a cylindrical mounting surface of 65 or 80 mm diameter (choose when ordering). If you want to mount something else, you got to replace the entire Z assembly, [see here](https://forum.onefinitycnc.com/t/using-the-cncdepot-spindle-z-20-gantry-rework/19948/3) for more information.

Welcome to the forum!