# Fusion 360 post processor (old thread) **URL:** \ **Category:** Fusion 360\ **Created:** [December 31, 2020, 3:07pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438 "2020-12-31T15:07:01Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![MustCreateThings](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mustcreatethings/32/3771_2.png) [@MustCreateThings](https://forum.onefinitycnc.com/u/MustCreateThings)\ **Post date:** [December 31, 2020, 3:07pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/1 "2020-12-31T15:07:01Z")
I don’t own a machine, yet, and am holding off until I can confirm Fusion 360 has a post-processor that will work with the OF. If anyone has any info or examples of how they are using F360 and their OF that would be great!!! This is a great forum! I’ve been reading and learning a lot, first post! Hope all is well and Happy New Year! \_Mike ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [December 31, 2020, 3:24pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/2 "2020-12-31T15:24:48Z")
Mike, There are many folks using Fusion 360 for their milling here. The post processor we are using until the “official” OF one comes out is the Buildbotics PP, which is the foundation for the OF controller. The rest of the folks have to keep me honest here but I do not think there is anything from stopping you from using Fusion 360 to start carving today. -Alex ---
**Author:** ![mrenters](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@mrenters](https://forum.onefinitycnc.com/u/mrenters)\ **Post date:** [December 31, 2020, 4:09pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/3 "2020-12-31T16:09:21Z")
It looks like the Onefinity post processor is available now. If you go to the manufacturing workspace and then Manage-\>Post Library you can search for Onefinity in the Fusion 360 Library. I’m just beginning my CNC journey, but I’ve used to it successfully machine a design. Martin ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/be3ccec0fc9e25717c8ccb7063637a411e7f25df.png) ---
**Author:** ![MindOfMcClure](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mindofmcclure/32/38_2.png) [@MindOfMcClure](https://forum.onefinitycnc.com/u/MindOfMcClure)\ **Post date:** [December 31, 2020, 4:24pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/4 "2020-12-31T16:24:00Z")
Awesome thank you Martin, I was not aware it was posted live yet. There you go @MustCreateThings you’re all set to join Team OneFinity! 🤠 -Alex ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [December 31, 2020, 5:07pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/5 "2020-12-31T17:07:02Z")
Thank you for the information. I looked in my Fusion 360 - free for personal use version - but did not find the OF listed in F360 library. Maybe it’s my version that is the issue. I noticed in your screenshot that you have ‘local’ highlighted - did you import it from somewhere? Like @MindOfMcClure, I was still waiting for an official release by Autodesk. ---
**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\ **Post date:** [December 31, 2020, 5:29pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/6 "2020-12-31T17:29:35Z")
I’ve been using the Buildbotics post until now, but now I’ll check out the OF! ---
**Author:** ![mrenters](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@mrenters](https://forum.onefinitycnc.com/u/mrenters)\ **Post date:** [December 31, 2020, 6:19pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/7 "2020-12-31T18:19:22Z")
I’m using the Personal Use Fusion 360 December update. In the screenshot I have local highlighted because I installed it as my (only) CNC processor. Click on ‘Fusion 360 library’ (step 1) and then type ‘onefinity’ in the the search bar and press enter (step 2). The Kirbre Enterprises Inc Onefinity selection will come up. Highlight it and drag it to ‘local’ (steps 3+4). ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/c/cc6341efe1f836b17ddd0244ed2a15ac60fa1605.png) To use it, I created my tool paths and then selected Actions-\>Post Process and it came up with the Onefinity selected as the post processor. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/b/b5f81f532484b2afef0b24dcb8eec5d74690c4b3.jpeg) Hope this helps. Martin ---
**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Post date:** [December 31, 2020, 6:26pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/8 "2020-12-31T18:26:33Z")
I appreciate your quick reply and taking the time to explain. I did not think to do a search for OF - assumed it would be listed. I have it now in my local folder ready to use. Thank you, Tom ---
**Author:** ![MustCreateThings](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mustcreatethings/32/3771_2.png) [@MustCreateThings](https://forum.onefinitycnc.com/u/MustCreateThings)\ **Post date:** [December 31, 2020, 8:55pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/9 "2020-12-31T20:55:18Z")
Awesome! Thank you all for the reply! I hope to join the team soon. \_Mike ---
**Author:** ![Sapoopoo](https://avatars.discourse-cdn.com/v4/letter/s/ad7895/32.png) [@Sapoopoo](https://forum.onefinitycnc.com/u/Sapoopoo)\ **Post date:** [January 2, 2021, 4:09pm UTC](https://forum.onefinitycnc.com/t/fusion-360-post-processor-old-thread/2438/10 "2021-01-02T16:09:57Z")
I can also confirm that the PP for OF is available on fusion 360. I was just able to download to my local and cloud space.