Fusion Insider to Gen 2 Elite Redline G-Code Issues

I’m a Fusion Insider user and have recently set up the Gen 2 Elite Forman with the Redline controller with an ATC. Everything has been working as it should with manual tool changes coming back to the right place and the ATC changes happening just fine. Now this week things have been a bit different. It started with random manual tool changes getting an M0 code (pause) rather than the M6 code line (manual tool change). This is a pain because the only thing I can do is to stop the program perform a manual change and then ‘Jump to Line’ to get going again. Now today things got really interesting when the tool change line was left out all together!! The machine just went on cutting as if it had changed the tool, this meant that 1/4” wide holes were cut with a 1/2” bit!!! Luckily I was focusing and spotted something amiss before it got too disastrous.

If anyone has any info or solutions that would be amazing, this is my full time job and having this investment not working properly is more than boring!!

BTW I have reinstalled the RedLine driver for Fusion but that didn’t fix anything.

Are you certain each bit has a different tool number?

Absolutely. The only thing that is ‘new’ here is that Fusion Insider updated last week.

Oh, and I get this Warning line on my NC Program file "Warning: (RealTimeCNC-RTSX_V2.cps:442) unreachable code after return statement"

Send the file to support@realtimecnc.com and they can take a look.

Thanks, I’ll do that now. :slight_smile: