# G3 Mounting Options

**URL:** <https://forum.onefinitycnc.com/t/g3-mounting-options/24053>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [December 17, 2023, 4:54pm UTC](https://forum.onefinitycnc.com/t/g3-mounting-options/24053 "2023-12-17T16:54:50Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tomdigi](https://avatars.discourse-cdn.com/v4/letter/t/b9e5f3/32.png) [@Tomdigi](https://forum.onefinitycnc.com/u/Tomdigi)\
**Post date:** [December 17, 2023, 4:54pm UTC](https://forum.onefinitycnc.com/t/g3-mounting-options/24053/1 "2023-12-17T16:54:50Z")

</div>

Is there an extension arm to allow the G3 to move further away from the 1F or any table top mounts?

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [December 17, 2023, 5:33pm UTC](https://forum.onefinitycnc.com/t/g3-mounting-options/24053/2 "2023-12-17T17:33:39Z")

</div>

I do not believe through Onefinity, but the G3Touch has a standard VESA mounting hole arrangement so you should have many options for a mount.

[https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/mounting-and-mechanical-data](https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/mounting-and-mechanical-data)

---

<div class="post-metadata">

**Author:** ![MikeXYZ](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mikexyz/32/32034_2.png) [@MikeXYZ](https://forum.onefinitycnc.com/u/MikeXYZ)\
**Post date:** [May 19, 2025, 7:21pm UTC](https://forum.onefinitycnc.com/t/g3-mounting-options/24053/3 "2025-05-19T19:21:57Z")

</div>

There is now! …Reviving an old thread to help anyone still looking for a solution.  
I sell one in my [Etsy](https://stingraydandm.etsy.com) shop, and on my [website](https://www.stingraydesignandmanufacturing.com/stingraycncsolutions/p/onefinity-masso-extension-mount).  
Released it about 2 weeks ago.  
Currently in stock.

 ![STINGRAY ONEFINITY MASSO EXTENSION MOUNT-1](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/f/af82da4f418876b24940d2d0d0ebef140fcb0739.jpeg)

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [May 19, 2025, 9:32pm UTC](https://forum.onefinitycnc.com/t/g3-mounting-options/24053/4 "2025-05-19T21:32:51Z")

</div>

and it works perfectly.