# GCode looks different on 1F preview **URL:** \ **Category:** CAD (Design) Software\ **Created:** [May 1, 2021, 6:42pm UTC](https://forum.onefinitycnc.com/t/gcode-looks-different-on-1f-preview/5334 "2021-05-01T18:42:11Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![RCNunya](https://avatars.discourse-cdn.com/v4/letter/r/45deac/32.png) [@RCNunya](https://forum.onefinitycnc.com/u/RCNunya)\ **Post date:** [May 1, 2021, 6:42pm UTC](https://forum.onefinitycnc.com/t/gcode-looks-different-on-1f-preview/5334/1 "2021-05-01T18:42:11Z")
OK, designed this sign for my brother in law in Carbide Create. The letters are all mostly cut with a V bit, and the tools and cut out is with a 1/8th. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/2/1296fb016056634b32184a52b611dcda73b49c48.jpeg) If I export the VBit code and 1/8th separately (This is the way I always did with Shapeoko, not sure if necessary with 1F or if it will prompt for tool change), the 1/8th stuff looks in the correct postition, but the Vbit looks pushed to the right. ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/9/902e85ce7d7366665b1ae6baaad98cc3a1ff273d.png) ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/5/5b6d1179755c153ccadb9a92b3d9b56d80c0a065.png) If I export all code, it looks as it should on the controller. Any ideas? ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/e/0eb7ac877da31ca7e08c9b2c9f4530d85a90d00b.png) ---
**Author:** ![Hermsen.BJ](https://avatars.discourse-cdn.com/v4/letter/h/779978/32.png) [@Hermsen.BJ](https://forum.onefinitycnc.com/u/Hermsen.BJ)\ **Post date:** [May 1, 2021, 9:46pm UTC](https://forum.onefinitycnc.com/t/gcode-looks-different-on-1f-preview/5334/2 "2021-05-01T21:46:34Z")
It does look like it should… If you included a profile pass around your stock it would also display the larger size. ---
**Author:** ![MikeH](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@MikeH](https://forum.onefinitycnc.com/u/MikeH)\ **Post date:** [May 2, 2021, 5:48pm UTC](https://forum.onefinitycnc.com/t/gcode-looks-different-on-1f-preview/5334/3 "2021-05-02T17:48:35Z")
The preview on the 1F only shows the dimensions of what’s being cut in that file - it won’t show you the entire stock. ---
**Author:** ![RCNunya](https://avatars.discourse-cdn.com/v4/letter/r/45deac/32.png) [@RCNunya](https://forum.onefinitycnc.com/u/RCNunya)\ **Post date:** [May 3, 2021, 6:52pm UTC](https://forum.onefinitycnc.com/t/gcode-looks-different-on-1f-preview/5334/4 "2021-05-03T18:52:51Z")
Got ya. Thanks. The cut did turn out fine.