# Gen 2 Elite Journeyman Bearing Sound

**URL:** <https://forum.onefinitycnc.com/t/gen-2-elite-journeyman-bearing-sound/37727>\
**Category:** Uncategorized\
**Created:** [March 3, 2026, 9:15pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-journeyman-bearing-sound/37727 "2026-03-03T21:15:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/c/c502e02cb1055482c68b30bcbff31291112898e2.png) [@system](https://forum.onefinitycnc.com/u/system)\
**Post date:** [March 3, 2026, 9:15pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-journeyman-bearing-sound/37727/1 "2026-03-03T21:15:32Z")

</div>

When this rail was returned (via warranty replacement sent out next day), it was determined that the nut on the front of the ballscrew was simply overtightened. Loosening it to proper spec solved the issue.

> [@Gen 2 Bearing Noise](https://forum.onefinitycnc.com/t/gen-2-bearing-noise/38059):
>
> Hi folks, and @Onefinity there was a pretty heated topic a few weeks ago about a “bad” X assembly. The user claimed it wasn’t right, and when Onefinity sent him a new one, he again said that one wasn’t right either. 1F refunded him for the machine, but the videos remain up on YouTube. I wanted to see if I could duplicate his “issue”. First try, one take and done. The more I have seen of his videos, the more I feel like there is more going on than meets the eye. Attached is my short video tha…