# Gen 2 Elite with Masso?

**URL:** <https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302>\
**Category:** Gen 2 Elite Series\
**Created:** [January 25, 2026, 7:21pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302 "2026-01-25T19:21:18Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![MKrupp](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@MKrupp](https://forum.onefinitycnc.com/u/MKrupp)\
**Post date:** [January 25, 2026, 7:21pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/1 "2026-01-25T19:21:18Z")

</div>

Wondering if it’s possible to use the Masso on the gen 2.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 25, 2026, 8:59pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/2 "2026-01-25T20:59:58Z")

</div>

The gen two is only available with the Redline HMI and Realtime controller.

---

<div class="post-metadata">

**Author:** ![MKrupp](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@MKrupp](https://forum.onefinitycnc.com/u/MKrupp)\
**Post date:** [January 25, 2026, 10:28pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/3 "2026-01-25T22:28:52Z")

</div>

Yep, I can see that. I guess I could have been a bit more clear.

If I buy a gen 2 without the screen can I ditch the redline controller and attach the Masso I have on my gen 1 elite?

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 25, 2026, 10:43pm UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/4 "2026-01-25T22:43:37Z")

</div>

It’s semi-possible , but it will not have any technical support in the unofficial configuration.

You’d need different wires, homing sensors and power supply (The gen 1 elite power supply will not supply sufficient power for the gen 2 upgraded 2Nm motors).

---

<div class="post-metadata">

**Author:** ![MKrupp](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@MKrupp](https://forum.onefinitycnc.com/u/MKrupp)\
**Post date:** [January 26, 2026, 12:38am UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/5 "2026-01-26T00:38:22Z")

</div>

Hey, thanks for the response, especially on a Sunday!

---

<div class="post-metadata">

**Author:** ![WmHipple](https://avatars.discourse-cdn.com/v4/letter/w/9d8465/32.png) [@WmHipple](https://forum.onefinitycnc.com/u/WmHipple)\
**Post date:** [November 11, 2026, 2:22am UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-masso/37302/6 "2026-11-11T02:22:04Z")

</div>

I am thinking about this based on the current sale…

Buy a new Foreman - works package or whatever makes sense…

Build the Gen 2 machine - take all my masso stuff off my Gen 1 - put it on Gen 2

Sell the Gen 1 machine with Redline equipment

Obviously warranty will be a nightmare…Pretty much I am on my own - but I already was and am, so not much has changed

The really silly thing is depending on what I can get for a used machine, that is cheaper than replacing my tool holders, not to mention the spindle

Any chance Redline supports a PWNCNC spindle with ISO tool changer?  
How many aux outputs does it support? - currently I am using 6 from Masso, although 2 are lights, so I could squeak by with 4 - at least one has to be a toggle though