# Gen 2 Elite with Redline HMI 15" Screen Installation Video (FAQ)

**URL:** <https://forum.onefinitycnc.com/t/gen-2-elite-with-redline-hmi-15-screen-installation-video-faq/37390>\
**Category:** Elite Series Gen 2 Official FAQs\
**Created:** [February 6, 2026, 12:03am UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-redline-hmi-15-screen-installation-video-faq/37390 "2026-02-06T00:03:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [February 6, 2026, 12:03am UTC](https://forum.onefinitycnc.com/t/gen-2-elite-with-redline-hmi-15-screen-installation-video-faq/37390/1 "2026-02-06T00:03:08Z")

</div>

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/1/8110e9fb88161b9cb44f9b6187de8c0e6f8a1ff7.jpeg "Onefinity CNC GEN 2 Elite Series Assembly & Installation with @RedlineCNCOfficial HMI 15" Screen") ](https://www.youtube.com/watch?v=nbVTpYM2JjQ)

Updated 2/5/26