# Gen2 Tramming Process

**URL:** <https://forum.onefinitycnc.com/t/gen2-tramming-process/37967>\
**Category:** Uncategorized\
**Created:** [March 24, 2026, 12:20am UTC](https://forum.onefinitycnc.com/t/gen2-tramming-process/37967 "2026-03-24T00:20:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwarmoth](https://avatars.discourse-cdn.com/v4/letter/j/7cd45c/32.png) [@jwarmoth](https://forum.onefinitycnc.com/u/jwarmoth)\
**Post date:** [March 24, 2026, 12:20am UTC](https://forum.onefinitycnc.com/t/gen2-tramming-process/37967/1 "2026-03-24T00:20:37Z")

</div>

Is there a new procedure for Tramming a Gen2? I found the Gen1 'post’ but it calls out that the post does not apply to Gen2 machines.

> [@(Gen 1)Tramming / Micro Tramming screws in feet FAQ - Front To Back](https://forum.onefinitycnc.com/t/gen-1-tramming-micro-tramming-screws-in-feet-faq-front-to-back/8421):
>
> There are a few methods to tram your Gen 1 machine. Loosening some z mount bolts, using 123 blocks, tram arms, folded pieces of tin foil, are all methods that can have acceptable outcomes. Left to right tram is relatively easy to correct. (we recommend 1,2,3 blocks [Amazon.com: WEN 10423 3 x 2 x 1-Inch Steel-Hardened Precision 123 Blocks, Two Pack : Industrial & Scientific](https://amzn.to/3uvGpzY?tag=benmyers-20) ) Front to back is a bit harder. Micro Tram bolts give the ability to tram around a 1/32 adjustment, micro amounts. If…

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [March 24, 2026, 3:36pm UTC](https://forum.onefinitycnc.com/t/gen2-tramming-process/37967/2 "2026-03-24T15:36:00Z")

</div>

Correct me if I am wrong but he wanted the gen two tramming procedure. Not the gen one.

---

<div class="post-metadata">

**Author:** ![JimmyBuckets](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@JimmyBuckets](https://forum.onefinitycnc.com/u/JimmyBuckets)\
**Post date:** [March 26, 2026, 12:19am UTC](https://forum.onefinitycnc.com/t/gen2-tramming-process/37967/3 "2026-03-26T00:19:44Z")

</div>

I asked for a video on best practices for Gen2 tramming…maybe they will make one.