# Get lifting help (Gen 2 is HEAVY!)

**URL:** <https://forum.onefinitycnc.com/t/get-lifting-help-gen-2-is-heavy/37444>\
**Category:** Gen 2 Elite Series\
**Created:** [February 12, 2026, 8:17pm UTC](https://forum.onefinitycnc.com/t/get-lifting-help-gen-2-is-heavy/37444 "2026-02-12T20:17:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Greenley](https://avatars.discourse-cdn.com/v4/letter/g/2acd7d/32.png) [@Greenley](https://forum.onefinitycnc.com/u/Greenley)\
**Post date:** [February 12, 2026, 8:17pm UTC](https://forum.onefinitycnc.com/t/get-lifting-help-gen-2-is-heavy/37444/1 "2026-02-12T20:17:28Z")

</div>

Just had my visit from UPS. Total weight of 8 boxes, 385 lbs. That is the Gen2 Foreman w/screen, table 2.2kw spindle and ATC. Heaviest box is 90lbs.

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [February 12, 2026, 9:16pm UTC](https://forum.onefinitycnc.com/t/get-lifting-help-gen-2-is-heavy/37444/2 "2026-02-12T21:16:06Z")

</div>

Congratulations Bill. Mine should be a little lighter as I am getting the journeyman and no QCW.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 5, 2026, 9:14pm UTC](https://forum.onefinitycnc.com/t/get-lifting-help-gen-2-is-heavy/37444/3 "2026-03-05T21:14:50Z")

</div>

That’s why we put the ‘2 person lift’ sticker on the X rail! 🙂 Beefy!